Function Of The Keypad - AVT Magic Touch Operating Manual

Isdn telephone hybrid system
Table of Contents

Advertisement

O p t i o n :
M A G I C
H y b r i d
P A G E 1 3 4
K e y p a d
9.3

Function of the keypad

The keypad functions can be seen in the following table.
TAB. 10
Key
ON
AIR
KEYPAD FUNCTIONS
Description
Standard operating mode: in this operating mode only one
caller is On Air, all other callers receive the Hold signal. On the
MAGIC Hybrid Keypad
play.
The operating mode can only be set on the display if the
MAGIC TOUCH software is not installed.
In the On Air or Pre Talk mode, all callers are automatically
mixed. On the MAGIC Hybrid Keypad,
played.
The operating mode can only be set on the display if the
MAGIC TOUCH software is not running.
The callers are automatically put on Hold. By pressing the
Next key on the MAGIC Hybrid Keypad, the first caller is put
On Air. Pressing this key once again disconnects the call and
the next caller is put On Air, and so on.
the MAGIC Hybrid Keypad.
The operating mode can only be set on the display if the
MAGIC TOUCH software is not running.
The 0...9 keys are for entering the number. The connection is es-
tablished by pressing the Call/Redial, Pre Talk, Hold or On
Air key. When pressing Call/Redial, the next free channel is
used. Via the Pre Talk, Hold, On Air buttons, the channel can
explicitly be chosen.
By pressing this key, the last character of an input is cancelled.
This key is also used to stop a function.
Pressing this key cancels the whole input.
The quick dial keys QD 1 ... QD 3 are used to call a stored num-
ber directly. The number can be stored either by the PC soft-
ware (see CHAPTER 7.7.3.8, page 84) or by the keypad (see
CHAPTER 9.4, page 136).
Puts the caller in Pre Talk.
The physical Audio interface is configured by the PC software
(see CHAPTER 7.7.3.14.2, page 99).
Puts the caller on Hold.
The physical Audio interface is configured by the PC software
(see CHAPTER 7.7.3.10, page 87).
Puts the caller On Air.
The physical Audio interface is configured by the PC software
(see CHAPTER 7.7.3.14.2, page 99).
1
Standard
is indicated on the dis-
Conference
is dis-
Next
is displayed on

Advertisement

Table of Contents
loading

Table of Contents