Controls On The Front Panel; Changing The Fuse - AVT Magic Touch Operating Manual

P u t t i n g i n t o o p e r a t i o n
P A G E 3 0
(1)
POWER
Lights up when system is ready for operation.
(2)
CONNECT
Lights up if at least one telephone connection is established.
(3)
ALARM
Lights up if a fault has occurred in the unit. The Windows PC software
provides more detailed information about the error (see CHAPTER A1,
page 137).
5.4

Controls on the front panel

The system has no controls on the front panel; there is only a socket for the
Handset or the MAGIC Hybrid Headset (not included in the delivery).
5.5

Changing the fuse

The mains system is protected by a fuse, which is soldered into the system.
Only qualified personnel are allowed to change the fuse.
Dangerous voltage when the equipment is opened!
The unit should only be repaired by experienced technicians or our expert
personnel.
green
green
red