AVT Magic Touch Operating Manual page 59

M A G I C T O U C H S o f t w a r e
name: HKEY_CURRENT_USER). It is recommended that one configuration is
stored for all users to keep the effort at the beginning of the operation as low
as possible. The configuration can be stored with the help of the Store all set-
tings global option.
After pressing the OK button all settings are accepted.
The Cancel key deletes all made settings.
FIG. 35 INDEX CARD GENERAL SETTINGS
7.7.3.1.1 Conference Settings
If there is more than one connection, the performance of the system can be in-
fluenced with the help of the conference settings.
The More than one person in PRE TALK option provides the possibility to talk
to all callers in the Pre Talk mode simultaneously. The signals of all callers are
digitally mixed in the system and the mixed signal is transmitted to the Pre
Talk Audio interface. Also, a digital N-1 signal is generated for each caller. If
this option is not set, only one caller can be in the Pre Talk mode. If a second
caller is put into the Pre Talk mode, the first caller is automatically switched
into the Hold mode.
The More than one person in ON AIR option enables a simultaneous On Air
conference with all callers who are in the On Air mode. The signals of all call-
ers are digitally mixed in the system and the mixed signal is transmitted to the
On Air Audio interface. Also, a digital N-1 signal is generated for each caller.
If this option is not set, only one caller can be in the On Air mode. If a second
caller is put in the On Air mode the first caller is automatically switched into
the Hold mode.
To ensure that one or several callers can be in the Pre Talk mode as well as in
the On Air mode, the PRE TALK and ON AIR concurrently option must be
active. If this function is not active, several callers can either be in Pre Talk or
P A G E 5 9