Magic Touch Software; Hardware Requirements; Installation Of The Windows Pc Software Magic Touch - AVT Magic Touch Operating Manual

7 M A G I C T O U C H S O F T W A R E
The configuration of the system is done by the Windows PC software MAGIC
TOUCH, included in the delivery.
7.1

Hardware requirements

The PC must have the following minimum requirements:
– IBM PC AT, IBM PS/2 or 100% compatible
– Pentium Processor (> 266 MHz) recommended
– Windows 95B/98/ME/2000/XP operating systems
– 5 MB available hard disk space
– screen resolution of 1024 x 768 or restricted to 800 x 600 pixels (max. 5 caller
lines)
– at least one available RS232 serial interface
– Microsoft, IBM PS/2 or 100% software compatible mouse
7.2

Installation of the Windows PC Software MAGIC TOUCH

Insert the included disk in the disk drive and press the START button on Win-
dows 95B/98/ME/2000/XP. Select the sub menu item Run... and insert into
the command line
<drive name:>setup.exe
(e.g. A:setup.exe).
Follow the installation program instructions.
After the installation start the software , by clicking the MAGIC TOUCH
symbol.
Connect the PC via a null modem cable (pin 2 and pin 3 are crossed, pin
5=GND) to the system.
Turn the system on.
The red blinking ALARM LED signals that the system is booting. After ap-
prox. 45 seconds the LED stops blinking. The system is now ready for opera-
tion.
M A G I C T O U C H S o f t w a r e
P A G E 3 9