Table of Contents
Advertisement
CHAPTER 7.7.3.14, page 98).
To select and activate configured alternative On Air Lines on the MAGIC
TOUCH user interface the Activate Mode option has additionally to be set.
The activation of alternative Pre Talk Audio interfaces can only be done via
MAGIC TOUCH LAN or MAGIC SCREENER applications.
Keep in mind that the Pre Talk, Hold and On Air Audio interfaces can still be
used if they are configured.
Therefore the maximum build provides a total of twelve
terfaces for the MAGIC TOUCH user interfaces.
1
Until release 3.0 a maximum of only seven Audio interfaces are available.
If the Reset Line to Default Audio Line on DROP option is active the line is
automatically switched to the default On Air Audio interface after the estab-
lishement of the connection. This does not depend on the selection of the al-
ternative On Air Line. The standard Audio interface is the On Air Audio in-
terface, if defined. Otherwise it is the defined alternative On Air Line with the
smallest index (e.g. Alternative On Air Line 1).If the option is not set, the set-
ting of the Audio interface is kept after the connection is dropped.
Normally, the alternative On Air Lines are only used if no conference be-
tween callers is desired. However, if several lines with the same alternative
On Air Line are used, a conference between the callers of the same alternative
On Air Line can be set up.
This function also effects the alternative Pre Talk Lines, which can be used
by MAGIC TOUCH LAN or by MAGIC SCREENER.
For this set the Alternative Audio Lines concurrently option. Therefore with
the maximum construction one On Air, four Alternative On Air and one Pre
Talk conference can be implemented simultaneously on the MAGIC TOUCH
user interface.
If this option is not used always only one caller can be on the alternative Line.
Callers who have the same index (e.g. alternative Line 1) are automatically
put on Hold.
The selection of the alternative Line in use is done by a long pressing (approx.
1-2 seconds) of one of the keys Pre Talk, Hold or On Air or Alternative 1...4
on the MAGIC Touch surface.
If there is an existing connection, only the button with the active mode can be
pressed to avoid an accidental switch over (see Fig. 38, page 62).
If there is no connection, any button can be pressed.
When operating with the mouse press the left mouse button. The Preselect the
Audio Line dialog for the preselection of the alternative On Air Audio inter-
face opens.
FIG. 37
DIALOG TO PRESELECT THE ON AIR AUDIO INTERFACE
M A G I C
T O U C H
S o f t w a r e
1
different Audio in-
P A G E 6 1
Advertisement
Table of Contents
