Cabling Of The System - AVT Magic Touch Operating Manual

5.6

Cabling of the system

The following figures show with help of examples, the general cabling of the
system.
The assignment of the Audio and relay interfaces are only an example. The as-
signment can be configured in accordance with your personal requirements
(see CHAPTER 7.7.3.14, page 98).
You must not forget to connect the included dongle(s) to the Slave system(s),
since the basic function of a slave is configured by this. Please pay attention
to the numbering of each dongle.
When using a Master system, no dongle has to be connected.
If a combination of Master and Slave system is used, not all available S
nections need to be connected to the ISDN network. If you are working with
a maximum of only 4 B channels, but also want to use the Pre Talk function,
you only need to connect 2 S
P u t t i n g i n t o
interfaces to the Master system.
0
o p e r a t i o n
con-
0
P A G E 3 1