Table of Contents
Advertisement
M A G I C
T O U C H
S o f t w a r e
P A G E 5 0
The display of the caller information in this presentation can be automated via
→
General
Display Settings
TER 7.7.3.1.6, page 66). If this option is set, the information on the caller whose
mode has just been changed is displayed (e.g. when switching from Pre Talk
to Hold) is always displayed.
Via the
(Info) button the information of each connected caller can be
displayed at any time.
Also the display of the name and the telephone number is done with the help
of the Info button. To display the name, it must have been previously entered
into the telephone book database and the telephone number has to be trans-
mitted from the caller's end.
If there is no connection on a line, the line can be predefined for a call. Press-
ing
(Info) opens the extended telephone book dialog.
FIG. 25
TELEPHONE BOOK WITH LINE PREPARATION
As in the telephone book dialog a caller can be selected and be predefined for
the line using the
(SET) button. The
tings. After selecting the caller the name of the caller is displayed in the Info
button.
The establishment of the connection is done by pressing one of the following
buttons
(Pre Talk),
The system tries to keep the predefined lines for incoming calls available as
long as possible. These lines will be used only when no other line is available.
The presettings will not be deleted however.
Additionally, beneath the info button, the temper
tral),
(unfriendly), age and gender
are displayed.
The entry and the indication of the age is only possible with help of the op-
tional MAGIC SCREENER database software.
→
Show Information automatically (see CHAP-
(CLEAR) key deletes all preset-
(Hold) or
(On Air).
(male),
(friendly),
(neu-
(female) of the caller
Advertisement
Table of Contents
