Table of Contents
Advertisement
M A G I C
T O U C H
S o f t w a r e
P A G E 1 2 2
7.12
What do I have to set, if I...
In the following chapters some important configurations are described. These
are necessary for operation with the software and hardware options. The set-
tings described must always be carried out. Further possibilities can be found
in the relevant documentation.
7.12.1
... I want to use MAGIC TOUCH LAN?
– Necessary settings in the MAGIC TOUCH software:
Open the configuration dialog in Configuration
(1)
on the link LAN. Set the Use LAN interface option. As Port, enter 8453.
Details can be found in CHAPTER 7.7.3.13, page 95.
Now switch to the Security link. Enter in TCP/IP Access Protection, the IP
(2)
Address of the PC with the MAGIC TOUCH LAN software which is to be
given access to the MAGIC Touch via the LAN.
Details can be found in CHAPTER 7.7.3.12, page 92.
Store all settings by pressing the OK key.
(3)
– Necessary settings in the MAGIC TOUCH LAN software:
Open the configuration dialog via Configuration
(4)
on the link LAN. Enter in Interface settings
MAGIC TOUCH PC. As Port enter 8453.
Store all settings by pressing the OK button.
(5)
→
→
System
Edit and click
→
→
System
Edit and click
→
IP Address, the address of the
Advertisement
Table of Contents
