Table of Contents
Advertisement
Configuration of the database
FIG. 45
The database support is activated by the Data base support option.
After pressing the OK button, the settings are accepted.
The Cancel key deletes the settings.
7.7.3.3.1
Database path
Enter the paths of the necessary database files in Database path.
If the path of the files can be indicated via a letter of a drive (e.g. S:\Pro-
gram\MAGIC TOUCH\Caller.mdb) set the Allow local path for Data base
option.
When indicating the letter of the drive ensure that all computers of the net-
work use the same letter of the drive for the database index.
If this option is not active, the selection of UNC path (Universal Naming Con-
vention) must be set.
An UNC path can be recognised with its two prefixed „\\". If your database
was installed in the network search for the correct path. Best possibility is to
use the Browse function and to select network environment. If the MAGIC
TOUCH user interface and the database file Caller.MDB were installed on
the same computer this procedure must be done.
In System Database (*.mdw) enter the path of the relevant Screener.MDW file.
This file can be stored in the same directory as the Caller Database that has
the name Caller.MDB in the in the delivery mode. The name of the
Caller.MDB file can be copied and changed
M A G I C
CONFIGURATION OF THE DATABASE ACCESS
T O U C H
S o f t w a r e
1
at any time.
P A G E 7 1
Advertisement
Table of Contents
