Table of Contents
Advertisement
7.12.2
... I want to use MAGIC SCREENER?
– Necessary settings in the MAGIC TOUCH software:
Open the configuration dialog in Configuration
(1)
on the link Database. Set the Database support option. In the Database path
submenu set the paths for the System database files and Caller database. The
path should also be entered as an UNC path ("\\"), since this path is transmit-
ted to MAGIC TOUCH LAN and MAGIC SCREENER. The directory, where
the files are stored, must be released in the network.
Details can be found in CHAPTER 7.7.3.3, page 70.
In the MAGIC Screener remote control menu, activate the Enabled option. In
(2)
Network settings enter 8454 for the port.
Details can be found in CHAPTER 7.7.3.3, page 70.
Now go to the Security link. Enter in TCP/IP Access Protection, the IP-Ad-
(3)
dress of the PC with the MAGIC SCREENER software which shall get access
to the MAGIC Touch via the LAN.
Details can be found in CHAPTER 7.7.3.12, page 92.
Store all settings by pressing the OK button.
(4)
– Necessary settings in the MAGIC Screener software:
In MAGIC SCREENER, open the configuration dialog under Administration
(5)
→
Settings and choose the Screener operating mode . Set in LAN-Settings the
IP-Address of the MAGIC TOUCH PC. As Port enter 8454.
In Screener-Settings
(6)
number (normally the number of the telephone at the seat of the MAGIC
SCREENER PC).
If the Telephone Hybrid is operated through a PABX, the Prefix Numbers (see
CHAPTER 7.7.3.4.3, page 75) can be suppressed for internal calls by a minus
sign('-'). For this function the PABX telephone number must be entered with
a '-' prefix (Example: the PABX 130 must be entered as '-130').
Store all settings by pressing the OK button.
(7)
M A G I C
→
Own Screener-Number, enter a specific telephone
T O U C H
S o f t w a r e
→
→
System
Edit and click
P A G E 12 3
Advertisement
Table of Contents
