Table of Contents
Advertisement
M A G I C
T O U C H
S o f t w a r e
P A G E 4 6
If no telephone number is entered, either the manual dial panel or the tele-
phone book (depending on the Miscellaneous settings (see CHAPTER
7.7.3.1.8, page 68)) will be opened. Therefore the temporary call forwarding
is possible to any destination.
This function is a good possibility for the call forwarding destination. Enter
for example 'Manual' as Name to keep the function in mind.
7.5.1.4
Manual Call
7.5.1.4.1
Manual call by entering the telephone number
The operating key
FIG. 21
The telephone number is entered by the
Alternatively, the keypad of the PC can also be used. The connection is estab-
lished by pressing the Enter button . If the connection is established via the
Enter button the caller is always put in the Hold mode.
In the case that the Telephone Hybrid system is operated through a PABX,
the prefix number (the number is usually "0") has to be entered for external
calls (see CHAPTER 7.7.3.4.3, page 75).
Key
deletes the complete entry, key
the entry.
The establishment of the connections is activated by pressing either the
(Pre Talk) button, the
ton. Automatically, the next available line is used.
To close the dialog without establishing a connection, press key
These six keys
grammed via the Quick Dial system configuration (see CHAPTER 7.7.3.8,
page 84).
opens the dialog for manual dialling.
DIALOG FOR MANUAL CALL
(Hold) button or by pressing the
are programmable quick dial keys. They can be pro-
...
keys.
deletes only the last character of
(On Air) but-
.
Advertisement
Table of Contents
