Table of Contents
Advertisement
O p t i o n :
M A G I C
H y b r i d
- - - - - - - - - - - - - - - -
S T A N D A R D
- - - - H o l d - - - - - - - -
0 9 1 1 5 2 7 1 1 3 5
A I R P R E H O L D - - - -
P A G E 1 3 2
K e y p a d
9.2.1
Configuration of operating mode
When there is no connection, the configuration of the Hybrid is displayed.
A
If the MAGIC TOUCH software is installed, the operating mode cannot be set
via the MAGIC Hybrid Keypad.
The following operating modes are possible:
– Standard: always only one caller is On Air or in Pre Talk. All other
– Conference: all callers in the On Air or Pre Talk modes are mixed.
– Next: the callers are automatically on Hold. By pressing the Next but-
9.2.2
Entering the telephone number
When dialling the telephone number, the dialled number is displayed.
The number must be entered by the
A
The last number entered may be cancelled by pressing the
The whole input can be cancelled by pressing the
9.2.3
Level meter
If there is an existing connection, the level meter is displayed
has a maximum of 4 characters and 5 segments. The smallest representable
A
level is -34 dBu. The scale is divided into 2 dB steps. The maximum value is
+6 dBu.
1
The MAGIC Hybrid Keypad 7 and the MAGIC Hybrid Keypad 12 display the level meter
vertically.
callers are automatically in the Hold position.
ton the first caller goes On Air. By pressing this key once again, the
connection with this caller will be dropped (or switched to Hold or
Pre Talk depending on the configuration) and automatically, the
next caller goes On Air.
...
keys.
key.
key.
1
. This display
Advertisement
Table of Contents
