Table of Contents
Advertisement
M A G I C
T O U C H
S o f t w a r e
P A G E 8 6
7.7.3.9
Audio Level
The nominal Audio levels can be set separately for the input and output of
each system. The input level for Master/Slave systems is selected in Level In.
Correspondingly, the output level can be configured in Level Out. For the
nominal level the values
are available.
The head room is 6 dB. Therefore, if the nominal level is 9 dBu a maximal
level of 15 dBu can be achieved.
FIG. 56
If the Audio level of the callers is, on average, too quite or too loud, the level
can be increased or lowered down by the Incoming caller signal offset func-
tion.
Please note that the head room is decreased when increasing the level and
vice versa.
After pressing the OK button, the settings are accepted.
The Cancel key deletes all settings.
0 dBu, 3 dBu, 6 dBu and 9 dBu
AUDIO LEVEL SETTINGS
Advertisement
Table of Contents
