Messaging - AVT Magic Touch Operating Manual

M A G I C T O U C H S o f t w a r e
P A G E 1 0 4
7.7.3.16

Messaging

Via the Messaging (messaging settings) link the configuration is set for send-
ing and receiving of short messages between users of the MAGIC TOUCH,
MAGIC TOUCH LAN or the MAGIC SCREENER software.
FIG. 69
After pressing the OK button, all settings are accepted.
The Cancel key deletes all settings.
The Sender identification field supports the entry of a name to identify the
sender of the message. The name is prefixed automatically to the message.
If the Show Pop-up message in Pop-up window option is active, the received
message is displayed immediately in the window.
The pop-up window will be close automatically after a certain period of time.
This time period is set via the Automatically close Pop-up message window
after N seconds option. For N, enter in seconds, the duration for the window
to be open.
Several messages can be stored in a popup window. Enter in Keep N messages
in window, the number N for the maximal amount of messages to be stored.
CONFIGURATION OF THE MESSAGING PANEL