Night Mode - AVT Magic Touch Operating Manual

7.7.3.6

Night Mode

With the help of the Night Mode the behaviour of the system can be defined
if the MAGIC TOUCH position is not manned. Therefore, it is assured that
callers still reach a contact person or that at least the answering machine.
FIG. 50
After pressing the OK button, all settings are accepted.
The Cancel key deletes all settings.
To activate the Night Mode set the Enabled option.
Callers can either be forwarded by the Route incoming caller selection or they
are automatically put on Hold by Auto answer incoming caller to Hold.
When forwarding the call, the forwarding destination must be entered in
Telephone Number for Call Forwarding. Please ensure that call forwarding is
active (see CHAPTER 7.7.3.4.2, page 74).
If the Telephone Hybrid is operated through a PABX, the Prefix Numbers (see
CHAPTER 7.7.3.4.3, page 75) can be suppressed for internal calls using a mi-
nus sign ('-'). For this function, the PABX telephone number must be entered
with a prefix '-' (Example: the PABX 130 must be entered as '-130').
When selecting automatic call answer, the indication of the Hold Signal
Source is additionally essential. Depending on the configuration of the Audio
interfaces, a maximum of four different sources are available:
– On Air: the caller hears the Audio signal which is fed to the On Air inter-
face (normally the programme).
– Recorded Hold Signal: the caller hears the Audio signal, max. of 8 seconds,
stored in the system (see CHAPTER 7.7.3.10, page 87).
M A G I C
CONFIGURATION OF THE NIGHT MODE
T O U C H S o f t w a r e
P A G E 7 9