Table of Contents
Advertisement
M A G I C
T O U C H
S o f t w a r e
P A G E 9 6
wise a vice versa assignment is made.
This assignment is important to ensure a correct lightning up and down of
the keys
When activating the option Screener/Technician disables line for Presenter
when switched to PRE TALK, the line for the presenter is blocked as soon as
the screener (or technician) puts a caller in the Pre Talk mode. On the pre-
senter's screen, the line will be displayed in grey. Only when the screener has
put the caller in the Hold mode the presenter has access to the line again. If
the option is deactivated the presenter and the screener have both access to
the line.
When activating the Presenter disables line for Screener/Technician when
switched to (Alternative) ON AIR option the line is blocked for the screener
(or technician), as soon as the presenter puts a caller On Air or on Alt. ON AIR
1 ... 4. Now the line is displayed in grey for the screener/technician. The
screener/technician has again access to the line when the presenter puts the
caller on Hold. If the option is deactivated the presenter and screener/techni-
cian have both access to the line.
If the show host is not supposed to have any Pre Talk functions, the
Talk) button can be masked out by activating the Disable PRE TALK for Pre-
senter function.
Likewise, it is possible to mask out the key
this set the Disable ON AIR for Screener/Technician option.
Via the selection Volume controlled by you are able to define who is allowed
to use the gain control (see CHAPTER 7.5.2.4, page 52) for a caller. The
Screener and Presenter selection allows gain control by the screener (or tech-
nician) and the show host simultaneously. Consequently, the Screener setting
gives only the screener the right for the gain control, the Presenter setting
gives only the show host the right for this.
The switch over of the Pre Talk source (see CHAPTER 7.5.1.1, page 45) can be
automised, e.g. if the presenter uses always the Audio input and if the screen-
ing position uses always the handset. For this set the PRE TALK source auto
following option. Now, if the show host presses the
Audio input (setting
(or technician) uses a line in the Pre Talk mode, the Pre Talk source switches
over automatically to the handset (key setting
The assignment depends on the option Presenter is using MAGIC Touch (see
CHAPTER 7.7.3.13.2, page 95).
Please note that physically there is only one Pre Talk Audio interface, that
means that the show master and the screener can not use the Pre Talk func-
tion simultaneously.
If the show master and the screener want to use an independent Pre Talk in-
terface the alternative Pre Talk Audio interface must be established (see
CHAPTER 7.7.3.14, page 98).
7.7.3.13.3
Miscellaneous Settings
The transmission of the level headroom to the LAN clients can burden the net-
work depending on the bandwidth, especially if a lot of LAN clients are used
in parallel. To reduce the system load it is possible to enter in Miscellaneous
→
Settings
number between 1 and 10. If the set value is 1, each telegram will be transmit-
(Pre Talk) and
(On Air).
key) will be used automatically. If the screener
Send every N level meter value to MAGIC TOUCH LAN for N a
(Pre
(On Air) for the screener. For
(Pre Talk) button, the
).
Advertisement
Table of Contents
