AVT Magic Touch Operating Manual page 75

Isdn telephone hybrid system
Table of Contents

Advertisement

enables dialling via the Telephone Hybrid system when using a separate
screening telephone.
Previously, a caller was forwarded e.g. to an editor to provide his address.
When using a screening application, where the screener uses either the
MAGIC TOUCH LAN or the MAGIC SCREENER software, the screener must
be able to forward the caller to his own telephone as well as to establish con-
nections with this telephone. Here the screener will dial via the Hybrid to
make sure that the caller is available in the Hybrid system. After setting this
option, the call forwarding is displayed by a green arrow
one. If a screener wants to call a caller, he must press the call forwarding but-
ton. Depending on the configuration, either the telephone book or the manual
dial dialog opens. After entering the telephone number and after the estab-
lishment of the connection by the
screener's telephone rings first. If the receiver is off-hook, the connection to
the desired caller established automatically. Now the caller can be handled as
any other caller. If the screening telephone hangs up, the connection is
dropped. Pressing the call forwarding button again puts the caller on Hold.
7.7.3.4.3
Prefix Numbers
Via Prefix Numbers (outside line) two prefix numbers 1st. external Prefix
Number and 2nd. external Prefix Number can be set for the operation of the
Telephone Hybrid system with a PABX. With the prefix number, the PABX of-
fers the possibility of further outside line functions. The Default option de-
fines which of the two prefix numbers will normally be used to establish a
connection to an external partner when using the telephone book. For a None-
Default-prefix number, a name can be entered. This name will be displayed in
the telephone book when using a second prefix number.
In the manual call dialog (see CHAPTER 7.5.1.4.1, page 46) the prefix number
must always be entered.
The Skip Prefix Number on Incoming Call option should only be set if the
PABX prefixes the transmitted telephone number with the prefix number. The
telephone number must be displayed in the same way as it is normally
printed in the telephone book, that means [national dialling code] [city code]
telephone number.
Example:
M A G I C
within a city:
within a country:
from abroad:
T O U C H
S o f t w a r e
instead of a grey
( = call forwarding) button, the
5271130
09115271130
00499115271130
P A G E 7 5

Advertisement

Table of Contents
loading

Table of Contents