Table of Contents
Advertisement
M A G I C
T O U C H
S o f t w a r e
P A G E 1 1 6
After downloading the ISDN software, start the download for the IFE (inter-
face unit).
FIG. 83
IFE FIRMWARE DOWNLOAD
Select IFE Software. Via the Browse button look for the file ife_hybr.gpb. This
file can be found in the directory of the MAGIC TOUCH software installation.
Then press the Start button. The download process starts and takes approx. 5
minutes. Following this, a reset of the system is carried out.
Close the window withf the Close button. After booting the system the new
functions are available.
If your Hybrid system consists of a Master and a Slave system all systems
must be updated according to the above detailed procedure. For this, connect
the RS232 cable of the PC to the relevant RS232 interface of the respective sys-
tem.
If the MAGIC TOUCH LAN and/or MAGIC SCREENER options are also be-
ing used together with the MAGIC TOUCH software, these options must also
be updated.
Advertisement
Table of Contents
