Table of Contents
Advertisement
> > > > P R E H O L D - - - -
B 1 : U S e r B u s y
9.2.4
ISDN error messages
If there is a faulty connection, the ISDN provides a wealth of error messages.
The meaning of these messages can be looked up in Annex A2. The message
A
on the LCD display shows the concerned B channel in first position followed
by the error message.
TAB. 9
Error messages
Unass. number
No route
Normal disc.
User busy
No user resp.
Call rejected
Number chang.
Destin. error
Inval. number
No line avai.
No Network
Netw. failure
Congestion
Bearer capab.
Bearer serv.
Remote disc.
Procedure er.
Cannot dial
O p t i o n :
M A G I C
ISDN ERROR MESSAGES
Description
The number is not recognised by the ISDN. Check your input.
No route. When this message appears the ISDN is normally overloaded. Dial
again.
The connection was disconnected normally.
The number called is busy.
The called number is not responding. Possibly the wrong number was di-
alled.
Call was rejected. Perhaps the person called has done this.
Dialled number has been changed.
Possibly the equipment is switched off. The called end is not operational.
Invalid number.
No B channel available.
No ISDN available. Check your ISDN connection.
Temporary ISDN failure.
ISDN network error. Probably the wrong ISDN protocol is selected.
The wanted service is not available.
The wanted service is not implemented.
Connection was disconnected by the remote end.
Distant or local ISDN procedure error.
System cannot dial.
H y b r i d
K e y p a d
P A G E 13 3
Advertisement
Table of Contents
