Table of Contents
Advertisement
9.1
Working with the MAGIC Hybrid Keypad
Before operating the MAGIC Hybrid Keypad, the configurations of the MAGIC
TOUCH PC software - as described in CHAPTER 7.7.3.1.9 - have to be prop-
erly set.
9.2
LCD-Display
General information about the current connection status and the available B
channels is shown in the first line of the 2 x 20 character display. Following
displays are possible:
TAB. 8
Display
> > > >
- - - -
A I R
H O L D
P R E
- - - >
< - - -
1
O A 1
O A 2
O A 3
O A 4
2
P R 1
P R 2
P R 3
P R 4
P R 5
P R 6
? ? ? ?
1
The MAGIC Hybrid Keypad 7 displays only A1 instead of OA 1 . The MAGIC Hybrid Keypad 12
displays only the character 1.
2
The MAGIC Hybrid Keypad 7 displays only P1 instead of PR 1. The MAGIC Hybrid Keypad 12
displays simply the character P.
The second line changes its function according to the mode.
The last character of the second line always shows the status of the Pre Talk
interface. This interface can be used either with the optional handset (display
H) or with the analogue/digital (display A) XLR input. The switching of the
Pre Talk source is made with the
O p t i o n :
M A G I C
INDICATION OVERVIEW OF THE FIRST LINE OF THE DISPLAY
Meaning
outgoing call
incoming call
no connection
caller is On Air
caller is in Hold
caller is in Pre Talk
caller is being forwarded
forwarding connection
caller on Audio Line 1 is On Air
caller on Audio Line 2 is On Air
caller on Audio Line 3 is On Air
caller on Audio Line 4 is On Air
caller on Audio Line 1 is on Pre Talk
caller on Audio Line 2 is on Pre Talk
caller on Audio Line 3 is on Pre Talk
caller on Audio Line 4 is on Pre Talk
caller on Audio Line 5 is on Pre Talk
caller on Audio Line 6 is on Pre Talk
undefined condition
key.
HANDSET
INPUT
H y b r i d
K e y p a d
P A G E 13 1
Advertisement
Table of Contents
