Table of Contents
Advertisement
O p t i o n :
M A G I C
H y b r i d
P A GE 5 4
K e y p a d
5.3
Function of the keypad.
The keypad functions can be seen in the following table.
TAB. 6
Key
KEYPAD FUNCTIONS
Description
Standard operating mode: in this operating mode only one
caller is On Air, all other callers receive the Hold signal. On the
MAGIC Hybrid Keypad
play.
The operating mode can also be configured by the PC soft-
ware. (see 4.9.2.1, page 43).
Individual
Note: If the
key is locked.
In the On Air or Pre Talk mode all callers are automatically
Conference
mixed.
pad.
This operating mode can also be configured by the PC soft-
ware.
(see 4.9.2.1, page 43).
Individual
Note: If the
key is locked.
The callers are automatically put on Hold. By pressing the
Next key on the MAGIC Hybrid Keypad the first caller is put
On Air. Pressing this key once again disconnects the call and
the next caller is put On Air, etc.
MAGIC Hybrid Keypad.
The operating mode can also be configured by the PC soft-
ware. (see 4.9.2.1, page 43).
Individual
Note: If the
key is locked.
By pressing this key, the last character of an input is cancelled.
This key is also used to stop a function.
Pressing this key cancels the whole input.
The keys 0...9 are for the input of the number. The connection
is established by pressing the Call/Redial, Pre Talk, Hold or
On Air key. Pressing Call/Redial uses the next free channel. By
pressing Pre Talk, Hold, On Air, the channel can be explicitly
chosen.
The quick dial keys QD 1... QD 3 are used to call a stored num-
ber directly. The number can be stored either by the PC soft-
ware (see 4.9.2.6, page 47) or by the Keypad (see 5.4, page 55).
With the forwarding key the caller can be put through to any
previously stored or non-stored number. The programming of
this key (see 4.9.2.1, page 43) can be done either by the PC-soft-
ware (see 4.9.2.6, page 47) or by the Keypad (see 5.5, page 56).
The caller can be forwarded at any time, even when the tele-
phone is ringing.
With this key, a call to the last dialled number is set up auto-
matically on the first free channel. If the line is busy the num-
ber can be redialled by pressing the key once again.
All existing connections are dropped when this key is pressed.
For confirmation the
play. By pressing the key once again the connections are
dropped.
Global Drop
To cancel
retained.
Standard
is indicated on the dis-
mode was configured by the PC, this
is displayed on the MAGIC Hybrid Key-
mode was configured by the PC, this
Next
is displayed on the
mode was configured by the PC, this
Drop all?
message appears on the dis-
press C and the connections will be
Advertisement
Table of Contents
