Table of Contents
Advertisement
O p t i o n :
M A G I C
H y b r i d
- - - - - - - - - - - - - - - -
S t a n d a r d
P A GE 5 2
K e y p a d
5.1
Working with the MAGIC Hybrid Keypad
Before operating the MAGIC Hybrid Keypad, the configurations described in
chapter 4.4 first have to be properly set.
5.2
LCD-Display
General information about the current connection status and the available B
channels is shown in the first line the 2 x 20 character LCD Display. The fol-
lowing displays are possible:
TAB. 4
Display
> > > >
% % % %
- - - -
A I R
H O L D
P R E
- - - >
< - - -
L N 1
L N 2
L N 3
L N 4
? ? ? ?
The second line changes its function according to the mode.
The last character of the second line always shows the status of the Pre Talk
interface. This interface can be used either with the optional handset (display
H) or with the analogue/digital (display A) XLR input. The switching of the
Pre Talk source is made with this key
- If there is no connection, the configuration of the Hybrid is displayed.
A
The following operating modes are possible:
– Standard: only one caller is On Air or in Pre Talk. All other callers
– Conference: all callers in the On Air or Pre Talk modes are mixed.
– Next: the callers are automatically on Hold. By pressing the Next
NOTE
Only when the system has the optional AES/EBU/Analogue Module Pre Talk
and On Air can be used simultaneously.
INDICATION OVERVIEW OF THE FIRST LINE OF THE DISPLAY
Meaning
sent calls
incoming calls
no connection
caller is on air
caller is in hold
caller is in pre talk
caller is being forwarded
forwarding connection
caller is on audio line 1
caller is on audio line 2
caller is on audio line 3
caller is on audio line 4
undefined condition
are automatically in the Hold position.
key the first caller goes On Air. By pressing this key once again, the
connection with this caller will be dropped and automatically, the
next caller goes On Air.
.
Advertisement
Table of Contents
