Installation; Basic Connection - IDVIEW IV-110CD-SN Installation And Operating Manual

3. INSTALLATION

Please follow the instructions and the diagram below to set up the system.

3.1 Basic Connection

CONNECTING WITH A SINGLE CAMERA
Please set the MULTIPLEXER option to OFF on the REC SETTING page in the setup menu
when it is connected with a single camera. (Please refer to section 5.1 MULTIPLEXER option)
Camera
FROM MUX
VIDEO MAIN MONITOR
IN
OUT
TO
TO
MUX'S VCR IN
MONITOR
CONNECTING WITH A MULTIPLEXER
To match the multiplexer's recording speed, please set the MULTIPLEXER option to ON on the
REC SETTING page in the setup menu when it is connected with a multiplexer. (Please refer to
section 5.1 MULTIPLEXER option)
CONNECTING WITH A QUAD
Please set the MULTIPLEXER option to OFF on the REC SETTING page in the setup menu
when it is connected with a quad. (Please refer to section 5.1 MULTIPLEXER option)
AUDIO
IN
ETHERNET
10/100
OUT
Monitor
SD Card
RS-485
RS-232
ALARM I/O
9
DC12V