Cisco SPA232D Administration Manual page 94

Configuring the Voice Settings
Regional
Cisco SPA232D Administration Guide
Field
Speed Dial Act
Code
Paging Code
Secure All Call Act
Code
Secure No Call Act
Code
Secure One Call
Act Code
Secure One Call
Deact Code
Conference Act
Code
Attn-Xfer Act Code
Modem Line
Toggle Code
FAX Line Toggle
Code
Media Loopback
Code
Description
Assigns a speed dial number.
Default setting: *74
Used for paging other clients in the group.
Default setting: *96
Makes all outbound calls secure.
Default setting: *16
Makes all outbound calls not secure.
Default setting: *17
Makes the next outbound call secure. (It is redundant if all
outbound calls are secure by default.)
Default setting: *18
Makes the next outbound call not secure. (It is redundant if
all outbound calls are not secure by default.)
Default setting: *19
If this code is specified, the user must enter it before
dialing the third party for a conference call. Enter the code
for a conference call.
Default setting: blank
If the code is specified, the user must enter it before
dialing the third party for a call transfer. Enter the code for
a call transfer.
Default setting: blank
Toggles the line to a modem. Modem passthrough mode
can be triggered only by pre-dialing this code.
Default setting: *99
Toggles the line to a fax machine.
Default setting: #99
Use for media loopback.
Default setting: *03
4
93