Cisco SPA232D Administration Manual page 62

Configuring the Voice Settings
System
Cisco SPA232D Administration Guide
• You can deploy a syslog server to receive syslog messages from the ATA,
which acts as a syslog client. The syslog client device uses the syslog
protocol to send messages, based on its configuration, to a syslog server.
The syslog messages can be accessed by reviewing the "syslog.514.log"
file which resides in the same directory as the slogsrv.exe syslog server
application.
• Partners can download the Syslog Server for SPA Devices by using the link
below (login required):
www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/
ps10499/syslog_server_for_spa_devices.zip
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
System Configuration
Field
Restricted Access
Domains
IVR Admin
Password
Network Startup
Delay
Description
Domain of the service provider to which the ATA is
connected to. It prevents the ATA from connecting to other
service providers.
Password for the administrator to manage the ATA by
using the built-in IVR through a connected phone.
NOTE The registered HS can also manage the ATA or
deregister other HS with this password.
The number of seconds of delay between restarting the
voice module and initializing network interface.
Default setting: 3
4
61