Cisco SPA232D Administration Manual page 123

Configuring the Voice Settings
Line 1 Settings (PHONE Port)
NOTE
Cisco SPA232D Administration Guide
Passthrough Modem Call With <Modem Line Toggle Code>
Parameter
Modem Line
Modem Line
Toggle Code
FAX Disable
ECAN
Passthrough Modem Call With <Modem Line>
Parameter
Modem Line
FAX Disable
ECAN
Other fax parameters are not relevant to the call.
Passthrough Modem Call With Manual Configuration
Parameter
Preferred Codec
FAX V21 Detect
Enable
FAX CNG Detect
Enable
Value
No
*99
Yes
Value
Yes
Yes
Value
G.711u or G.711a
No
No
Description
If Modem Line Toggle Code is used
to make the modem call, do not set
it to Yes
Set it to any preferred code.
NOTE Pre-dial *99 before dialing.
Other fax parameters are not relevant
to the call.
Description
Description
Depends on the passthrough
codec used.
4
122