Vlan - Cisco SPA232D Administration Manual

Configuring the Network
Advanced Settings
Cisco SPA232D Administration Guide
Field
L2TP Passthrough

VLAN

Use the Network Setup > Advanced Settings > VLAN page to assign a VLAN ID
to your network. For example, your call control system may require a particular
voice VLAN ID.
To open this page: Click Network Setup in the menu bar, and then click
Advanced Settings > VLAN in the navigation tree. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
Field
Enable VLAN
VLAN ID
Description
Layer 2 Tunneling Protocol is the method used to enable
Point-to-Point sessions via the Internet on the Layer 2
level. Click Enabled to enable this feature, or click
Disabled to disable it. Default setting: Enabled
Description
Click Enabled to enable a VLAN, or click Disabled to
disable this feature. Default setting: Disabled
The VLAN ID can be any numeral from 1 through 4094.
When VLAN is enabled, the default setting is 1.
3
42