Cisco SPA232D Administration Manual page 64

Configuring the Voice Settings
System
Cisco SPA232D Administration Guide
Field
Debug Server
Transport
Debug Level
DevTest Password
Syslog Prefix
DECT Codec
Change
Description
The Debug information can be printed to the server with
the selected transport method (UDP and TLS.)
Default setting: UDP
Determines the level of debug information that will be
generated. Select 0, 1, 2, 3 or 3+Router from the drop-
down list. The higher the debug level, the more debug
information will be generated. Level 0 means that no
information will be collected. Levels 1, 2 & 3 generate
messages related to the voice ports only. Level 3+Router
generates debug content for both voice and router
components.
Default setting: 3
Used for internal automation test; not for the user.
Allows the user to prefix additional information to syslog.
Default setting: 215
Codec change between handset (HS) and base to match
RTP codec.
Default setting: yes
4
63