Cisco SPA232D Administration Manual page 39

Configuring the Network
Basic Setup
Cisco SPA232D Administration Guide
User Manual
If you prefer to set the system manually rather than automatically obtaining the
settings from an NTP server, click User Manual and then enter the date and time.
Field
Date
Time
Time Zone
To use a time server to establish the time settings, select Time Zone. Then
complete the fields in this section.
Field
Time Zone
Adjust Clock for
Daylight Saving
Changes
Time Server
Address
Resync Timer
Description
Enter the date in the following order: four-digit year,
month, day.
Enter the time in the following order: hour (from 1 to 24),
minutes, and seconds.
Description
Choose the time zone for the site where the ATA is in
operation.
Default setting: (GMT-08:00) Pacific Time (USA &
Canada)
Check the box if you want to automatically adjust the
time when Daylight Savings Time is in effect. Otherwise,
uncheck the box.
Default setting: Enabled
To use the ATA's default Network Time Protocol (NTP)
server, select Auto from the drop-down list. This is the
default setting. If you want to specify the NTP server,
select Manual, and then enter the NTP server address.
Default setting: Auto
Enter the Resync timer interval value (in seconds). This
timer controls how often the ATA resynchronizes with
the NTP server.
Default setting: 3600 seconds
3
38