Cisco SPA232D Administration Manual page 111

Configuring the Voice Settings
Line 1 Settings (PHONE Port)
Cisco SPA232D Administration Guide
Field
Use Auth ID
Auth ID
Resident Online
Number
Supplementary Service Subscription
The ATA provides native support of a large set of enhanced or supplementary
services. All of these services are optional. The parameters listed in the following
table are used to enable or disable a specific supplementary service. A
supplementary service should be disabled if a) the user has not subscribed for it,
or b) the Service Provider intends to support similar service using other means
than relying on the ATA.
Field
Call Waiting Serv
Block CID Serv
Block ANC Serv
Dist Ring Serv
Cfwd All Serv
Cfwd Busy Serv
Description
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
Default setting: no
Authentication ID for SIP authentication.
Default setting: blank
This setting allows you to associate a "local" telephone
number with this line using a valid Skype Online Number
from Skype. Calls made to that number will ring your
phone. Enter the number without spaces or special
characters.
Default setting: blank
Description
Enable Call Waiting Service.
Default setting: yes
Enable Block Caller ID Service.
Default setting: yes
Enable Block Anonymous Calls Service
Default setting: yes
Enable Distinctive Ringing Service
Default setting: yes
Enable Call Forward All Service
Default setting: yes
Enable Call Forward Busy Service
Default setting: yes
4
110