Cisco SPA232D Administration Manual page 91

Configuring the Voice Settings
Regional
Cisco SPA232D Administration Guide
Field
CPC Duration
Vertical Service Activation Codes
Vertical Service Activation Codes are automatically appended to the dial-plan.
There is no need to include them in dial-plan, although no harm is done if they are
inclu`ded.
Field
Call Return Code
Call Redial Code
Blind Transfer
Code
Call Back Act
Code
Call Back Deact
Code
Call Back Busy Act
Code
Cfwd All Act Code
Cfwd All Deact
Code
Description
Duration in seconds for which the tip-to-ring voltage is
removed after the caller hangs up. After that, tip-to-ring
voltage is restored and the dial tone applies if the
attached equipment is still off-hook. CPC is disabled if this
value is set to 0. Range: 0 to 1.000 second. Resolution is
0.001 second.
Default setting: 0 (CPC disabled)
Description
Call Return Code This code calls the last caller.
Default setting: *69
Redials the last number called.
Default setting: *07
Begins a blind transfer of the current call to the extension
specified after the activation code.
Default setting: *98
Starts a callback when the last outbound call is not busy.
Default setting: *66
Cancels a callback.
Default setting: *86
Starts a callback when the last outbound call is busy.
Default setting: *05
Forwards all calls to the extension specified after the
activation code.
Default setting: *72
Cancels call forwarding of all calls.
Default setting: *73
4
90