Cisco SPA232D Administration Manual page 177

Configuring the Voice Settings
DECT User
Cisco SPA232D Administration Guide
Field
Failover
Deregister
Bound IPEI
Description
When this feature is enabled and a call fails through the
selected line, the ATA automatically attempts to place the
call over another enabled DECT/PSTN line. Select yes to
enable this feature or select no to disable it.
Default setting: no
Cisco SPA232D now supports PSTN to DECT and
NOTE
DECT to PSTN outgoing line failover.
To deregister a handset, select yes. After you submit the
settings and the voice module reboots, then the handset is
deregistered. At that point, this parameter is reset to the
default value.
Default setting: no
Enter the device's IPEI number (a unique hardware
identifier comparable to a MAC address) if you want to
bind this device to the specified handset ID, such as
Handset 3. The IPEI can be found in the Settings > Phone
Info menu on the handset.
Default setting: blank
4
176