Cisco SPA232D Administration Manual page 174

Configuring the Voice Settings
DECT Line 1 - DECT Line 10
Cisco SPA232D Administration Guide
Field
Accept Media
Loopback Request
Media Loopback
Mode
Media Loopback
Type
Description
Controls how to handle incoming requests for loopback
operation.
Default setting: automatic
• never: Never accepts loopback calls; replies 486 to
the caller.
• automatic: Automatically accepts the call without
ringing.
• manual: Rings the phone first, and the call must be
picked up manually before loopback starts.
Default setting: Automatic
The loopback mode to assume locally when making call to
request media loopback. Choices are: Source and Mirror.
Default setting: source
NOTE If the ATA answers the call, the mode is determined
by the caller.
The loopback type to use when making call to request
media loopback operation. Choices are Media and Packet.
Default setting: media
Note that if the ATA answers the call, then the loopback
type is determined by the caller (the ATA always picks the
first loopback type in the offer if it contains multiple type)
4
173