Cisco SPA232D Administration Manual page 92

Configuring the Voice Settings
Regional
Cisco SPA232D Administration Guide
Field
Cfwd Busy Act
Code
Cfwd Busy Deact
Code
Cfwd No Ans Act
Code
Cfwd No Ans
Deact Code
Cfwd Last Act
Code
Cfwd Last Deact
Code
Block Last Act
Code
Block Last Deact
Code
Accept Last Act
Code
Accept Last Deact
Code
CW Act Code
CW Deact Code
CW Per Call Act
Code
Description
Forwards busy calls to the extension specified after the
activation code.
Default setting: *90
Cancels call forwarding of busy calls.
Default setting: *91
Forwards no-answer calls to the extension specified after
the activation code.
Default setting: *92
Cancels call forwarding of no-answer calls.
Default setting: *93
Forwards the last inbound or outbound call to the number
that the user specifies after entering the activation code.
Default setting: *63
Cancels call forwarding of the last inbound or outbound
call.
Default setting: *83
Blocks the last inbound call.
Default setting: *60
Cancels blocking of the last inbound call.
Default setting: *80
Accepts the last outbound call. It lets the call ring through
when do not disturb or call forwarding of all calls are
enabled.
Default setting: *64
Cancels the code to accept the last outbound call.
Default setting: *84
Enables call waiting on all calls.
Default setting: *56
Disables call waiting on all calls.
Default setting: *57
Enables call waiting for the next call.
Default setting: *71
4
91