Cisco SPA232D Administration Manual page 164

Configuring the Voice Settings
DECT Line 1 - DECT Line 10
Cisco SPA232D Administration Guide
Field
Proxy
Outbound Proxy
Use Outbound
Proxy
Use OB Proxy In
Dialog
Register
Make Call Without
Reg
Register Expires
Ans Call Without
Reg
Description
SIP proxy server for all outbound requests.
Default setting: blank
SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
Default setting: blank
Outbound Proxy
Enable the use of
Outbound Proxy
parameter and
ignored.
Default setting: no
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the
parameter is no, or if the
empty.
Default setting: yes
Enable periodic registration with the
parameter is ignored if the
specified.
Default setting: yes
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
Default setting: yes
Allow answering inbound calls without successful
(dynamic) registration by the unit. If proxy responded to
REGISTER with a smaller Expires value, the ATA will renew
registration based on this smaller value instead of the
configured value. If registration failed with an Expires too
brief error response, the ATA will retry with the value given
in the Min-Expires header in the error response.
Default setting: 3600
Expires value in sec in a REGISTER request. ATA will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if the
Register
parameter is no. Range: 0 – (231 – 1) sec
Default setting: yes
. If set to no, the
Use OB Proxy in Dialog
Use Outbound Proxy
Outbound Proxy
parameter is
Proxy
. This
Proxy
parameter is not
4
is
163