Cisco SPA232D Administration Manual page 86

Configuring the Voice Settings
Regional
Cisco SPA232D Administration Guide
Field
VoIP PIN Tone
PSTN PIN Tone
Feature Invocation
Tone
Call Remind Tone
Distinctive Ring Patterns
Field
Ring1 Cadence
Ring2 Cadence
Ring3 Cadence
Ring4 Cadence
Ring5 Cadence
Ring6 Cadence
Ring7 Cadence
Ring8 Cadence
Description
This tone is played to prompt a VoIP caller to enter a PIN
number.
This tone is played to prompt a PSTN caller to enter a PIN
number.
Played when a feature is implemented.
Default setting: 350@-4;*(. 1 /. 1 /1)
When there are 2 calls on the FXS port, and if one call is
held by the UUT (Unit under test) and the other is
connected, a holding tone is played on the UUT to remind
the presence of the held call.
Default setting: blank (the feature is not enabled)
Description
Cadence script for distinctive ring 1.
Default setting: 60(2/4)
Cadence script for distinctive ring 2.
Default setting: 60(.8/.4,.8/4)
Cadence script for distinctive ring 3.
Default setting: 60(.4/.2,.4/.2,.8/4)
Cadence script for distinctive ring 4.
Default setting: 60(.3/.2,1/.2,.3/4)
Cadence script for distinctive ring 5.
Default setting: 1(.5/.5)
Cadence script for distinctive ring 6.
Default setting: 60(.2/.4,.2/.4,.2/4)
Cadence script for distinctive ring 7.
Default setting: 60(.4/.2,.4/.2,.4/4)
Cadence script for distinctive ring 8.
Default setting: 60(0.25/9.75)
4
85