Cisco SPA232D Administration Manual page 14

Getting Started
Product Features
Cisco SPA232D Administration Guide
Feature Description
Steady green—The system is ready.
Slow flashing green—Acquiring an IP address, if
applicable. (DHCP is used by default.)
Fast flashing green—Upgrading the firmware.
SYSTEM
Off—There is no power or the system cannot boot
up.
Back Panel
Feature Description
RESET Performs two functions:
Restart the ATA: Press quickly (less than a second)
with a paperclip or similar object.
Restore the factory default settings: Press and
hold for 5 to 6 seconds.
LINE (Green) Connects to an analog phone line, using an RJ-
11 phone cable.
PHONE (Gray)
Connects to an analog phone, using an RJ-11 phone
cable.
ETHERNET
Connects to a device on your local area network
(Yellow)
(LAN), such as a computer by using an Ethernet
cable.
INTERNET
Connects to a broadband network device (DSL or
(Blue)
cable modem) or a network router by using an
Ethernet cable.
POWER
Connects to a power by using the provided adapter.
1
13