Cisco SPA232D Administration Manual page 73

Configuring the Voice Settings
SIP
Cisco SPA232D Administration Guide
Field
G729b Codec
Name
EncapRTP Codec
Name
NAT Support Parameters
Field
Handle VIA
received
Handle VIA rport
Insert VIA
received
Insert VIA rport
Substitute VIA
Addr
Send Resp To Src
Port
Description
G.729b codec name used in SDP.
Default setting: G729ab
EncapRTP codec name used in SDP.
Default setting: encaprtp
Description
If you select yes, the ATA processes the received
parameter in the VIA header (this value is inserted by the
server in a response to any one of its requests) If you
select no, the parameter is ignored. Select yes or no from
the drop-down menu.
Default setting: no
If you select yes, the ATA processes the rport parameter
in the VIA header (this value is inserted by the server in a
response to any one of its requests) If you select no, the
parameter is ignored. Select yes or no from the drop-
down menu.
Default setting: no
Inserts the received parameter into the VIA header of SIP
responses if the received-from IP and VIA sent-by IP
values differ. Select yes or no from the drop-down menu.
Default setting: no
Inserts the parameter into the VIA header of SIP
responses if the received-from IP and VIA sent-by IP
values differ. Select yes or no from the drop-down menu.
Default setting: no
Lets you use NAT-mapped IP:port values in the VIA header.
Select yes or no from the drop-down menu.
Default setting: no
Sends responses to the request source port instead of the
VIA sent-by port. Select yes or no from the drop-down
menu.
Default setting: no
4
72