Cisco SPA232D Administration Manual page 80

Configuring the Voice Settings
Provisioning
Cisco SPA232D Administration Guide
Field
Downgrade Rev
Limit
Upgrade Rule
Log Upgrade
Request Msg
Log Upgrade
Success Msg
Log Upgrade
Failure Msg
License Keys
Description
Enforces a lower limit on the acceptable version number
during a firmware upgrade or downgrade. The ATA does
not complete a firmware upgrade operation unless the
firmware version is greater than or equal to this parameter.
Default setting: blank
NOTE The devices with the following PID and TAN numbers (or
later numbers) cannot be downgraded to a version older than
1.3.3:
• PID—SPA232D-G1
• PID—SPA232D-G7
• PID—SPA232D-R1
• PID—SPA232D-R7
This parameter is a firmware upgrade script with the
same syntax as Profile_Rule. Defines upgrade conditions
and associated firmware URLs.
Default setting: blank
Syslog message issued at the start of a firmware upgrade
attempt.
Default setting: $PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH
Syslog message issued after a firmware upgrade attempt
completes successfully.
Default setting: $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Syslog message issued after a failed firmware upgrade
attempt.
Default setting: $PN $MAC -- Upgrade failed: $ERR
This field is not currently used.
TAN—74-9321-01 F0
TAN—74-9324-01 F0
TAN—74-9323-01 F0
TAN—74-9325-01 F0
4
79