Cisco SPA232D Administration Manual page 83

Configuring the Voice Settings
Regional
Cisco SPA232D Administration Guide
A mini-script of up to 127 characters that specifies the frequency, level and
cadence parameters of a call progress tone. May contain up to 127 characters.
Syntax: FreqScript;Z
1
The section Z is similar to the S
1
segment is followed by a frequency components parameter: Z
f [,on /off /f [,on /off
i,1 i,2 i,2 i,2 i,3
= n [+n ]+n [+n [+n [+n
1 2 3 4 5
components given in the FreqScript are used in that segment; if more than one
frequency component is used in a segment, the components are summed
together.
Example 1—Dial tone: 350@-19,440@-19;10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 10 s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 10s
Example 2—Stutter tone: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 2
Cadence Section 1: Section Length = 2s
Number of Segments = 1
Segment 1: On=0.1s, Off=0.1s with Frequencies 1 and 2
Cadence Section 2: Section Length = 10s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 12s
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
Call ProgressTones
Field
Dial Tone
[;Z ].
2
section in a CadScript except that each on/off
1
/f [,on /off /f [,on
i,3 i,3 i,4 i,4 i,4
]]]]] and 1 < n < 6 indicates which of the frequency
6 k
Description
Prompts the user to enter a phone number. Reorder Tone
is played automatically when Dial Tone or any of its
alternatives times out.
Default setting: 350@-5,440@-5;10(*/0/1+2)
= D
1
/off /f [,on /off /f
i,5
i,5 i,5 i,6 i,6
4
(on /off /
1 i,1 i,1
]]]]]), where fi,j
i,6
82