Configuring the Voice Settings
Line 1 Settings (PHONE Port)
Cisco SPA232D Administration Guide
G3 Passthrough FAX Call With <FAX Line Toggle Code
Parameter
FAX Disable
ECAN
Echo Canc Enable
Modem Line
FAX Line Toggle
Code
SG3/V.34 Passthrough FAX Call With <FAX Line Toggle Code
Parameter
FAX Disable
ECAN
Echo Canc Enable
Modem Line
FAX Line Toggle
Code
Value
No
Yes
No
#99
Value
Yes
Yes
No
#99
Description
Set it to any preferred code.
NOTE
Pre-dial #99 before dialing.
Fax call made in this method does not
detect fax tone or send out any fax
request messages (like NSE or Re-
INVITE message) to the remote
gateway, which causes interoperability
issue with remote side.
Other fax parameters are not
relevant to the call.
Description
Set it to any preferred code.
NOTE
Pre-dial #99 before dialing.
Fax call made in this method does not
detect fax tone or send out any fax
request messages (like NSE or Re-
INVITE message) to the remote
gateway, which causes interoperability
issue with remote side.
Other fax parameters are not
relevant to the call.
4
121