Cisco SPA232D Administration Manual page 63

Configuring the Voice Settings
System
Cisco SPA232D Administration Guide
Field
Handset (HS)
Pairing Password
Miscellaneous Settings
Field
DNS Query TTL
Ignore
Syslog Server
Syslog Server
Transport
Debug Server
Description
Password used as self authentication for Handset
registration and deregistration.
Default setting: blank
NOTE There are 3 options in Handset registration:
•
Register: For an unregistered HS, select Register and enter
the Handset Pairing Passwd for authentication.
•
Deregister: For a registered HS, select Deregister and enter
the Handset Pairing Passwd for authentication. Use select
softkey to deregister the HS.
•
Deregister Others: For a registered HS, select Deregister
Others. Enter <IVR Admin Passwd> for authentication. Use
select softkey to deregister others.
Description
In DNS packages, the server will suggest a TTL value to
the client; if this parameter is set to yes, the value from the
server will be ignored.
Default setting: yes
Specify the syslog server name and port. This feature
specifies the server for logging ATA system information
and critical events. If both Debug Server and Syslog
Server are specified, Syslog messages are also logged to
the Debug Server.
Default setting: blank
The Syslog messages can be printed to the server with
the selected tranport method (UDP or TLS)
Default setting: UDP
The debug server name and port. This feature specifies
the server for logging debug information. The level of
detailed output depends on the debug level parameter
setting.
Default setting: blank
4
62