Cisco SPA232D Administration Manual page 66

Configuring the Voice Settings
SIP
Cisco SPA232D Administration Guide
Field
SIP Accept
Language
DTMF Relay MIME
Type
Hook Flash MIME
Type
Remove Last Reg
Use Compact
Header
Escape Display
Name
Description
Accept-Language header used. There is no default (this
indicates that the ATA does not include this header) If
empty, the header is not included.
Default setting: blank
The MIME Type used in a SIP INFO message to signal a
DTMF event.
Default setting: application/dtmf-relay.
The MIME Type used in a SIP INFO message to signal a
hook flash event.
Default setting: application/hook-flash.
NOTE To provide SIP INFO flashhook event to the Broadsoft
server, the defualt setting needs to be changed to "application/
broadsoft."
Determines whether or not the ATA removes the last
registration before submitting a new one, if the value is
different. Select yes to remove the last registration, or
select no to omit this step.
Default setting: no
Determines whether or not the ATA uses compact SIP
headers in outbound SIP messages. Select yes or no from
the drop-down list. Select yes to use compact SIP
headers in outbound SIP messages. Select no to use
normal SIP headers. If inbound SIP requests contain
compact headers, the ATA reuses the same compact
headers when generating the response regardless the
settings of the Use Compact Header parameter. If inbound
SIP requests contain normal headers, the ATA substitutes
those headers with compact headers (if defined by RFC
261) if Use Compact Header parameter is set to yes.
Default setting: no
Determines whether or not the Display Name is private.
Select yes if you want the ATA to enclose the string
(configured in the Display Name) in a pair of double quotes
for outbound SIP messages. If the display name includes "
or \, these will be escaped to \" and \\ within the double
quotes. Otherwise, select no.
Default setting: no
4
65