Cisco SPA232D Administration Manual page 109

Configuring the Voice Settings
Line 1 Settings (PHONE Port)
Cisco SPA232D Administration Guide
Field
Use OB Proxy In
Dialog
Register
Make Call Without
Reg
Register Expires
Ans Call Without
Reg
Use DNS SRV
DNS SRV Auto
Prefix
Description
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the parameter Use
Outbound Proxy is no, or the Outbound Proxy parameter is
empty.
Default setting: yes
Enable periodic registration with the Proxy parameter. This
parameter is ignored if Proxy is not specified.
Default setting: yes
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
Default setting: no
Expires value in sec in a REGISTER request. The ATA will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if the
Register parameter is no. Range:
Default setting: 3600
Allow answering inbound calls without successful
(dynamic) registration by the unit.
Default setting: no
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
Default setting: no
If enabled, the ATA will automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a
DNS SRV lookup on that name.
Default setting: no
4
31 – 1) sec.
0 – (2
108