Printer Options - Datamax Iclass Operator's Manual

4.2.4 Printer Options

The Printer Options menu contains module, file-handling, and option functions:
Menu Item
MODULES
PRINT DIRECTORY
PRINT FILE
FORMAT MODULE
DELETE FILE
PACK MODULE
PRESENT SENSOR
MODE
AUTO
ENABLED
DISABLED
RETRACT DELAY
070 x 10mS
CUTTER
MODE
AUTO
ENABLED
DISABLED
28
Controls memory handling functions, where:
Prints a listing of available space, files, and types; see
Appendix A.
Prints from a list of available files.
Formats the selected module, erasing all data.
Removes selected files from the module directory.
Note: Protected modules will not be displayed, and
Removes deleted files and defrags the module to
recover memory space.
Controls the Present Sensor, and the Peel and Present
options, where:
Sets the detection method and response of the printer,
where:
Checks for the presence of the sensor and if found, the
sensor is enabled; otherwise, the function is ignored.
Enables the sensor. If not detected, a fault is
generated.
Disables the sensor.
Programs a time delay for retraction of the next label in
the print job, where:
Is the range, times 10 milliseconds.
(1 - 255)
Controls the Cutter option, where:
Sets the detection method and response of the printer,
where:
Detects, enables, and sets the label stop location for
the cutter; if not detected, the option will be ignored.
Enables and sets the label stop location for the cutter;
if not detected, a fault will be generated.
Disables the option.
Details
space will not be recovered until packed.
I-Class