Datamax Iclass Operator's Manual page 124

Follow the steps below to save a manually entered setup as a configuration file:
Step Displayed Message
1 READY
MENU MODE
2
SYSTEM SETTINGS
SYSTEM SETTINGS
3
CONFIGURATION FILE
CONFIGURATION FILE!
4
RESTORE AS CURRENT
CONFIGURATION FILE!
5
SAVE SETTING AS
SAVE SETTING AS!!
6
:
SAVE SETTING AS!!
7
SPECIAL :
SPECIAL STOCK
8
SUCCESSFUL
114
Action
Press the Key.
Use the Key to
scroll to SYSTEM
SETTINGS then press it
once again to select it.
Press the Key to
select CONFIGURATION
FILE.
Press the Key to
scroll to SAVE SETTING
AS.
Press the Key.
Enter a file name using the
Key to scroll
through the characters.
Note: To change an accepted character, select the
delete function (solid flashing block) then
press the ENTER Key.
Use the Key to
accept the character.
Note: To abort the Save function, delete all entered
characters in the file name then press the
ESCAPE Key.
Press the Key
repeatedly to save the file
name and return to Ready.
Comment
You are entering MENU
MODE.
The Key can also
be used. You are entering
SYSTEM SETTINGS.
You are entering the
CONFIGURATION FILE
submenu.
The Key can also
be used.
Press the Key to
exit this selection.
The Key can also
be used.
Continue entering the file
name in this manner
("SPECIAL STOCK" has
been used as an
example).
Save complete. (To
restore a saved file, see
Section 4.2.5.)
I-Class