Media Settings - Datamax Iclass Operator's Manual

Displayed Message
MENU MODE
ENTER PASSWORD
0 0 0 0
KEEP HOST CHANGES?
ENTER=YES
SAVE CHANGES?
ENTER = YES
The following designations are used throughout the menu listings below:
Symbol
♦

4.2.2 Media Settings

The Media Settings menu contains label and ribbon settings, and printhead maintenance
selections.
Menu Item
MEDIA TYPE
THERMAL TRANSFER
DIRECT THERMAL
I-Class
The Menu Key has been pressed, where:
Requires entry of the correct security password for
menu access.
Requires a decision regarding existing host commands
that have affected the configuration of the printer,
where pressing ENTER will save these changes or
pressing ESC will discard them.
Requires a decision regarding changes that have been
made to the printer's settings, where pressing ENTER
will save these changes or pressing ESC will discard
them.
Note: If required, a reset will automatically occur.
Denotes a firmware default setting or value.
Denotes a setting can only be changed via the menu.
Selects the method used to print labels and should be
set according to the type of media being used, where:
Sets printing for media that requires a ribbon to
produce an image.
Sets printing for media that is reactive to heat to
produce an image.
Details
Definition
Details
23