Datamax Iclass Operator's Manual page 50

System Settings (continued)
Menu Item
PEEL MODE
DISABLED
ENABLED
SECURITY ♦
SELECT SECURITY
DISABLED
SECURE MENU
MENU AND TEST
MODIFY PASSWORD
MODIFY PASSWORD?
CANCEL KEY = YES
UNITS OF MEASURE
IMPERIAL
METRIC
INPUT MODE
DPL
LINE
40
Allows the SOP signal to initiate (via GPIO option) the
feeding of the labels, where:
Feeds regardless of SOP.
Feeds only when SOP is received.
Allows menu password protection, where:
Enables or disables the security feature, where:
Note: The default password must be changed to
activate.
Allows entry.
Sets a password requirement for menu entry.
Sets a password requirement for menu and test
entries.
Modifies the four-digit password required when security
is enabled, where:
Enters the password (after confirmation); otherwise,
press the ESC Key to keep the current password.
Note: The default password is 0000.
Sets the measurement standard for the printer, where:
Uses inches.
Uses millimeters and centimeters.
Defines the type of processing that occurs when data is
received, where:
Processes data for standard DPL printing; see the Class
Series 2 Programmer's Manual.
Processes data for template (Line Mode) printing; see
the Class Series 2 Programmer's Manual.
Details
I-Class