Datamax Iclass Operator's Manual page 49

System Settings (continued)
Menu Item
UNLOCK FEATURE
0 0 0 0 0 0
SET FACTORY DEFAULTS
SET FACTORY DEFAULT?
CANCEL KEY = YES
FORMAT ATTRIBUTES
XOR
OPAQUE
TRANSPARENT
LABEL ROTATION
DISABLED
ENABLED
IMAGING MODE ♦
MULTIPLE LABEL
SINGLE LABEL
PAUSE MODE
DISABLED
ENABLED
I-Class
Unlocks a corresponding feature with the entry of the
correct code.
Returns the printer settings to the factory-programmed
values or the Factory Setting File values, where:
Overwrites the current configuration and restores the
default configuration ( ), or if selected the Factory
Setting File. Otherwise, press the ESC Key to keep the
current configuration.
Note: A reset will occur and, if no Factory Setting
File is used, all settings returned except
CUSTOM ADJUSTMENTS and calibrations.
Defines the way overlapping text, bar codes, and
graphics are printed, where:
Does not print intersecting areas, for
example:
Overwrites intersecting areas with
those last formatted, for example:
Prints intersecting areas, for
example:
Allows the label format to be rotated 180 degrees,
where:
Prints formats without rotation.
Prints flipped formats.
Determines the process used to format labels, where:
Formats multiple images, as memory permits, to
achieve the fastest throughput.
Note: Time stamps will indicate the moment of
imaging rather than printing.
Formats an image only after a previous format has been
printed to achieve the most accurate time stamps.
Allows controlled interactive printing, where:
Prints labels without pausing.
Requires the user to press the PAUSE Key to print each
label.
Details
39