Printer Options - Datamax E-Class Mark III Professional Operator's Manual

Printer Options

The Printer Options menu contains file-handling, module, and optional equipment settings:
Modules

Present Sensor

Cutter

The menu selections are defined as follows:
DISPLAYED ITEM
MODULES
DIRECTORY
PRINT FILE
PROCESS FILE
FORMAT MODULE
DELETE FILE
COPY FILE
UNPROTECT
MODULE
PRESENT SENSOR
MODE
ENABLED
DISABLED
RETRACT DELAY
(1 - 255 x 10 mS)
070
CUTTER
MODE
DISABLED
AUTO
ENABLED
42
Controls memory handling functions, where:
Allows viewing and printing of the available space and file types (including plug-in files) present on a
module. Only detected modules will be listed, and selecting ALL will display all results. (See the
Programmer's Manual for memory allocation information.)
Prints selections from stored file
File Extension
DBM A font sample.
DCM The configuration commands contained in the file.
DIM The image.
DLB The stored label.
DLN The name of the language.
DMS The database contained in the file for RFID.
DPL A label format, if detected.
DTT A font sample.
PLU The names of the files contained in the plug-in directory.
PRN Is processed as a DPL file.
TXT Is processed as a DPL file.
Processes a selected file for use by the printer.
Selects from a list of modules available for formatting by the printer. Choosing FORMAT MODULE will
erase existing data in the selected module
Selects from the list of available files for deleting.
Selects from the list of available files for copying, prompting you for the destination module before
execution.
Selects from the list of available modules to unprotect, and then prompting you regarding the
outcome of the attempt.
Controls the "on-demand" dispensing of labels , where:
Sets the detection method and response of the printer:
Enables the Present Sensor (or Peel and Present mechanism) and sets the label stop location; if not
detected, a fault will be generated.
Disables the option.
Programs a time delay for the retraction of the next label in the print process, where:
Is the range, times 10 milliseconds; and Seventy (times ten) is the default setting.
Controls the Cutter operation, where:
Sets the detection method and response of the printer:
Disables the cutter.
Is the default setting, where the presence of the cutter option is automatically sensed. If detected,
the cutter is enabled; otherwise, it will be ignored.
Enables the cutter. If the cutter is not detected, a fault will be generated.
ITEM DESCRIPTION
types:
Printed Result
Chapter 4 – Menu System